User Instructions

In minutes naturally refresh, rejuvenate, and enhance your volume and texture.

The Q-Redew is intended for use on dry hair.

Step 1 - Fill the Reservoir

  1. Remove reservoir from the Q-Redew appliance with finger.
  2. Flip the reservoir over. Open rubber inlet cover.
  3. Fill the reservoir with water. Distilled water is recommended (never put anything other than water in the reservoir)
  4. Replace rubber inlet cover
  5. Replace reservoir to unit by lining up reservoir into slot, and click into place.

    Step 2 - Plug Unit into Electrical Outlet.

    *The Q-Redew is 120 voltage 650 watts 60 Hz. Do not use power adaptors or convertors as they will damage the Q-Redew and the Manufacture's Warranty would not apply. Q-Redew Products is patent pending in the EU with intention of providing 240 voltage units in the future.

      Step 3 - Appliance Will Begin to Warm Up.

      Indicator light will blink while the appliance is warming up.

      Step 4 - When Light Turns Solid the Q-Redew is Ready For Use.

      Automatic Shut-Off feature: Do not leave your plugged in appliance unattended. However, if you do not use your appliance within 5 minutes the unit will switch to inactive mode for your safety. The indicator light will go dark, indicating the product has shut off.

      Restarting the Plugged-in Unit: Applying pressure to the trigger will start the warming period again.

      Step 5 - Test the Q-Redew Appliance Before Using.

      Before applying warm mist to hair, always test mist wand by holding the mist wand away from your body for the first shot of mist, so you are familiar with how much mist will be emitted. Always use your Q-Redew with prongs up, not tilting towards floor, to assure a steady flow of steam.

      Step 6 - Pull trigger to emit warm mist into hair to rejuvenate, enhance, and reshape volume and texture. Use the Q-Redew with prongs up to maintain steady flow of steam.

      Individual preferences will determine the right amount of warm mist.

      Step 7 - For your comfort during use:

      Do not place prongs directly on scalp or skin to avoid discomfort, skin irritation, or burns. Keep the Q-Redew appliance moving. To avoid discomfort, skin irritation, or burns, do not hold pointed in one place for an extended period of time.